- Alarming by manual pressing, reset by a special key
- Re-settable (non-breaking glass)
- With alarm indicating LED and checking bar turn Red
- Friendly installation and test
|Alarm Current||≤ 30mA(equivalent resistance is 470Ω/1W)|
|Visual Indicator||Red Illuminates and checking bar turn Red after alarming|
|Dimension (L×W×H)||97×93×49mm(with back box)|
Wiring and Connection
First install the back box onto the wall using screws.
Connect cable to manual call point body shown in Fig. 2.
Combine the body and back box by tenon.
Flush mounting: It is not suitable.